911

Tailored fit storage cover for Performance Roof Box.

No matter where the adventure takes you. The robust roof basket provides more storage space on every journey. Whether it's a trip to the beach, a trip to the mountains or a holiday in the snow; luggage can be easily and flexibly secured in the roof box even outside the luggage compartment. The roof basket was designed and tested in the Weissach Development Centre. The lightweight yet extremely stable aluminium frame structure is powder-coated in matte black and features a matte black painted front trim and comes with the words “PORSCHE” on the front. The floor of the roof box consists of 5 lengthwise profiles. Loads carried can be secured individually to them – for example, using the 2 lashing belts and 4 belt holders provided. Installing the roof basket is very simple. It is fixed firmly to the cross beams of the roof transport system base carrier with a few turns. A wide range of Porsche Tequipment and lifestyle accessories are available for the roof basket. These include a petrol and a water canister, canister holders, recovery boards, board holders a folding spade, a water-repellent outdoor travel bag, belt holders and additional lashing belts. Details: - Roof basket - Material: Aluminium, powder-coated, and plastic, painted - Colour: black (matte) - Dimensions: 1.500 mm x 1.120 mm x 135 mm - 4 belt holders and 2 lashing belts Note: When mounting luggage, country-specific legal requirements of the Road Traffic Regulations must be observed. Please note the approved roof load of your vehicle.

Suitable for all Porsche load-carrying devices (e.g. roof box, bicycle rack, racing bike carrier, ski rack and snowboard holder). Optimal transport base Theft protection in the form of locks on each carrier. Parallel carrier rails allow simple and secure mounting of accessories. Total weight of the system is only 5 kg. Load bearing capacity max. 75 kg.

The backrest protector prevents soiling and damage to the backs of the seats through dirty shoes or kicks by the rear passengers. It can be attached effortlessly at the bottom by means of a magnet clip and hook. Four integrated pockets provide additional storage space. Suitable for all Porsche's. 1 pack single cover.

Hardwearing mat for protection against soiling and damage to vehicle seats. Can be used with all child seats, including those with ISOFIX mountings. Includes 2 storage pockets. Can be fitted on Panamera, Cayenne, Macan and Taycan vehicle seats and the passenger seat of the 911 and Cayman/Boxster.

The side decorative stickers with model logo.

2 chains with fine-link chain strands. Please note: Not in conjunction with wheel spacers. With 19 and 20-inch wheels, snow chains may only be fitted on the rear axle.

2 chains with fine-link chain strands. For 295/35 R20, 295/30 R21 and 305/30 R21 tyres. Please note: Snow chains may only be fitted on the rear axle.

2 chains with fine-link chain strands. Please note: Not in conjunction with wheel spacers.

Genuine Porsche Spark Plug. Applicable models below. Need fitted? Contact us to make a booking.

Car sponge with "PORSCHE" logo

Comprises decorative stickers for luggage compartment lid, roof and rear wing in selected colours. Please note: Not available for vehicles with electric slide/tilt roof or electric slide/tilt glass roof.

Stone guard films set in Black (matt) behind the driver's and passenger's doors to protect the rear wings.

Finished in black Alcantara® and with Porsche Crest: lid of centre console storage box

For vehicles without Aerokit (order no. VM2). Suits 992 Series: Carrera, S, Cab, Cab S, C4, 4S, 4S Cab, Targa 4, Targa 4S, T. Distinctive appearance includes: - Arc of light without red colouring - Side vents illuminated - Tail light in rear lid without red colouring Function and shape correspond to those of the standard version. Special Order from Germany. Fitting by official Porsche Centre advised. Please contact us to make a booking.

Throttle Control Blipper Assembly, 911 GT3 Cup Type 997.2 One only in stock to clear.

Porsche Classic tool bag with contents for Porsche 993 (1994 to 1998). The design of the tool bag was inspired by an interior combination that was popular for Porsche 993 models at the time. The outside of the bag is made of black perforated leather and the inside is Cashmere Beige. The centre of the bag is adorned with a scaled-down reproduction of the Porsche bonnet crest from the Porsche 993, which – for the first time ever – features solid black Porsche lettering. The bag is fastened with the well-known “Tenax” fasteners.The contents have been reconstructed based on the original tool bag and reissued with the help of the technical drawings of the tools from the original supplier from that time. In the final step, the Porsche Classic experts have given the bag some technical and visual upgrades and also added some additional useful tools.Contents:- Combination spanners (8, 10, 13, 18, 19 mm)- Wheel nut wrench- Retaining wrench for belt pulley, 24 mm- 3/8-inch ratchet wrench- Multi-tooth insert for alternator- Allen key for belt pulley- Combination pliers- Crank for emergency operation- Attachment for emergency operation (sliding roof & window regulator)- Phillips screwdrivers PH1 + PH2- Flat-head screwdriver- Towing lug- Hook for locking wheel nut cover- 2x Allen key for emergency operation of Targa roof- Porsche cleaning cloth

Touch-up paint with brush applicator for all models. Please enter VIN so we can supply correct colour.

For 992.1 GT3 Cup.

The towing loop is used for safe recovery when using the vehicle on race tracks, e.g. for pulling the vehicle out of a bed of gravel. To do this, the hook must be screwed into the thread provided at the factory in the front or rear bumper. For secure fastening, the hook should be screwed in using a screwdriver inserted through the hook eyelet, for example. The supplied spacer rings are used to align the loop horizontally. As required, one or more of the washers are screwed on as far as they will go onto the thread of the hook before fitting. Note: The towing loop must not be attached when driving on public roads. Likewise, use for towing the vehicle on public roads is not permitted. The recovery process itself must be carried out by trained personnel. When doing so, make sure that the tensile forces are applied in the direction of the hook, never vertically to this. Jerky loads must also be avoided. The towing loop is not suitable for securing the vehicle on a recovery vehicle or car transport trailer. Improper handling can result in injury or damage to the towing loop or vehicle.

Porsche Classic Tyre Protection Set; for use with all Porsche models until 255mm tyre width. Contents: 4 pieces. Ordered from Germany please allow 10-14 days into store.

The robust plastic canister can be filled with up to 12 L of drinking water. It is indispensable, especially on longer stretches through dry areas. The grey-coloured canister with distinctive "PORSCHE" logo is made of food-grade plastic. It thus meets the high quality standards that apply to all Tequipment products. Even under extreme conditions, for example in strong sunlight and high heat, the drinking water remains enjoyable. The canister is filled via the black screw-on cap. Water is conveniently drained via a practical tap. The drain tap can be secured to the side of the canister for transport. The water canister is secured to the roof cage while driving. A special canister holder with an easy-to-open latching clip is available. The holder is made of solid sheet metal and is protected against the weather and oxidation by robust, matte black powder coating. Details: - Water canister with drain tap - Material: food-grade plastic - Colour: grey - Volume: 12 L

Canister holder for attachment to the roof cage

For a clean way to store complete wheels: The Porsche wheel bags (size L) in a four-piece set for tyre sizes of 16–19 inches (tyre circumference of up to 2070 millimetres and diameter of up to 660 millimetres); for use on Porsche 356 (1948 to 1965), for Porsche 911 (1965 to 1989), for Porsche 914 (1970 to 1976), for Porsche 924 (1976 to 1988), for Porsche 928 (1978 to 1991), for Porsche 944 (1982 to 1991), for Porsche 959 (1987 to 1988), for Porsche 964 (1989 to 1994), for Porsche 968 (1992 to 1995), for Porsche 993 (1994 to 1998), for Porsche Boxster (986; 1997 to 2004) and for Porsche 996 (1998 to 2005). The bags are particularly durable thanks to the high-quality materials used and the first-class craftsmanship. The sewn-on pocket ensures secure storage of wheel bolts after wheel changes. The wheel bags also feature a position drawing with a marking to ensure that the wheels are assigned correctly.

With their sturdy material, Velcro fastening and adjustable straps, these four tyre carry bags with "PORSCHE" logo all the way round offer safe and perfectly fitting protection for a wheel-and-tyre set. The Porsche silhouette printed on the bags tells you straight away which tyre is inside, while a sewn on bag provides space for the wheel bolts. The practical handles ensure easy and convenient transport. Suitable for all 911 (991) wheels, Carrera GT (2004 to 2006), and for Porsche Cayenne E1 (2003 to 2007).

Set consisting of two decorative stickers for circumferential rim with "PORSCHE" lettering in selected colours. Suitable for: 911 (992) 718 Boxster / 718 Cayman (982) 911 (991 II)

Set consisting of two decorative stickers for circumferential rim with "PORSCHE" lettering in selected colours. Suitable for: 911 (992) 718 Boxster / 718 Cayman (982) 911 (991 II)

Protect your Porsche while working in the rear engine bay.